PM-A
Basic
Every oil change5,000–10,000 mi, by engine
Includes:
- Engine oil & filter
- Grease all chassis fittings
- Drain fuel/water separator
- Top off fluids, including DEF
- Tires, lights, wipers and horn
- Battery and charging test
- 25-point inspection
COMMERCIAL & FLEET SERVICE
Keep your fleet earning.
Mobile maintenance, diagnostics and repair for work trucks across the Tucson area. We come to your yard, so your trucks spend less time off the road.
- Class 1–8light to heavy duty
- On siteyard, job site or roadside
- Gas & dieselmixed fleets welcome
- From $149/hrpriced by truck class
Labor rates follow the truck’s classClass 1 $149/hr · Class 2–6 $198/hr · Class 7–8 $298/hr. Fleet PM programs are priced at the same class rates.
Full rate details →WHAT WE DO FOR FLEETS
Service that keeps trucks working.
Preventive maintenance
Oil, filters, fluids and inspections on a schedule built around your engines and duty cycle.
Mobile diagnostics
Dealer-level scan tools on site to find the real fault before parts are ordered.
Emissions & aftertreatment
DPF, DEF/SCR, EGR and NOx sensor faults diagnosed and repaired.
Cooling systems
Radiators, hoses, fans and coolant service built for Arizona heat.
Brakes & chassis
Brake, steering and suspension inspection and repair.
Electrical
Charging, starting, lighting and wiring faults traced and fixed.
Fuel systems
Fuel filters, lift pumps, injectors and fuel-pressure problems.
Drivetrain
Transmission, driveshaft, U-joint and differential service.
PREVENTIVE MAINTENANCE PROGRAM
PM-A through PM-D, at your yard.
A standard PM schedule for every unit in your fleet. Each level includes everything in the level before it.
PM-B
Intermediate
Every 10,000 miEvery other PM-A
Everything in PM-A, plus:
- Primary & secondary fuel filters
- Engine air & cabin filters as needed
- CCV / breather service
- Coolant strength & condition test
- Belts, hoses and CAC boots
- Electronic health scan
- 50-point inspection
PM-C
Major
30,000–60,000 miOr once a year
Everything in PM-B, plus:
- Transmission service, manufacturer’s method
- Front & rear differentials
- Transfer case (4x4)
- Brake fluid flush
- Air or hydraulic brakes, as equipped
- Suspension & steering inspection
- DEF filter
PM-D
Comprehensive
100,000+ miOr by engine hours
Everything in PM-C, plus:
- Cooling system flush & refill
- DPF / EGR cleaning as needed
- Valve lash adjustment where specified
- Glow plug or grid heater test
- Turbocharger & intercooler check
- Whichever comes first. Due by miles, engine hours or months, so trucks that idle a lot stay on schedule.
- Priced per unit. Fleet rates by truck class. PM-A and PM-B are set prices per truck; PM-C and PM-D are quoted per unit.
- Records for every truck. Each PM is logged by unit, and we tell you when the next one is due.
WHY MOBILE
Less downtime, fewer moving parts.
Typical shop visit
- Driver pulls the truck off its route
- Drive or tow to the shop
- Wait for an open bay
- Second trip to pick it up
Goshen mobile service
- Truck stays at your yard or job site
- We bring the tools and parts
- Service scheduled around your routes
- Back to work as soon as we’re done
TRUCKS WE SERVICE
Medium & heavy-duty platforms.
Engine examples by make. The VIN and engine serial number confirm the exact engine and parts.
International
MV, CV, HV, DuraStar & 4300
- 6.7LCummins B6.7
- 8.9LCummins L9
- 12.7LInternational S13
Isuzu
N-Series & F-Series cabovers
- 3.0L4JJ1-TC
- 5.2L4HK1-TC
- 6.7LCummins B6.7
Freightliner
M2, Business Class & Cascadia
- 5.1LDetroit DD5
- 7.7LDetroit DD8
- 12.8LDD13
- 14.8LDD15
Also on our trucks list
- Ford F-450 – F-750
- Ram 4500 / 5500
- Chevy 4500HD – 6500HD
- Hino & Mitsubishi Fuso
- Step vans & box trucks
- Work pickups & service bodies
- Cargo vans
- RV & motorhome chassis
HOW FLEET SERVICE WORKS
Set it up once. We keep it running.
- Step 1
Tell us about your fleet
Send the year, make, model, VIN and mileage for each truck, plus where they park.
- Step 2
We build a service plan
We match intervals to your engines and duty cycle and schedule around your routes.
- Step 3
We come to your yard
Maintenance and repairs on site, so trucks stay close to the job and drivers keep working.
- Step 4
Clear records for every truck
Itemized estimates and invoices per vehicle, so you always know what was done and what is due.
How is labor priced?
By truck weight class: $149/hr for Class 1, $198/hr for Class 2–6 and $298/hr for Class 7–8. Parts and fluids are itemized on your written estimate.
Do you work at our yard or job site?
Yes. We are a mobile shop. Tell us where your trucks park and we confirm access, space and coverage before scheduling.
Gas or diesel?
Both. We service gas and diesel work trucks, from pickups and vans to medium and heavy-duty diesels.
What should I send to get started?
Year, make, model and VIN for each truck, the engine if you know it, current mileage, the issue or service needed, and the location.
Can you handle a mixed fleet?
Yes. Many fleets run a mix of pickups, vans and medium-duty trucks. We plan service per vehicle and keep each truck’s records separate.
READY WHEN YOU ARE
Let’s get your trucks on a plan.
Send your fleet list or a single truck that needs attention. We’ll confirm the details and the schedule.